MakerFocus NESPi Case, Retroflag Nespi Case, Raspberry Pi 3 NES FC Style Case with Cooling Fan and Screw Driver Enclosure Compatible with Raspberry Pi 3, 2 and B+
Huge Savings Item! Save 15% on the MakerFocus NESPi Case, Retroflag Nespi Case, Raspberry Pi 3 NES FC Style Case with Cooling Fan and Screw Driver Enclosure Compatible with Raspberry Pi 3, 2 and B+ by MakerFocus at Makassar Webs. MPN: 59TJW30A008018QKJ. Hurry! Limited time offer. Offer valid only while supplies last. NESPi Case, Retroflag Nespi Case, Raspberry Pi 3 NES FC Style Case with Cooling Fan and Screw Driver Enclosure Compatible with Raspberry Pi 3, 2 and
NESPi Case, Retroflag Nespi Case, Raspberry Pi 3 NES FC Style Case with Cooling Fan and Screw Driver Enclosure Compatible with Raspberry Pi 3, 2 and B+
We created this Pi case applying the most iconic element in the retro game world as a homage to the most classic console ever made.
NES NESPi case specifically designed for Raspberry Pi 3, 2 and B+.
Perfectly match Raspberry Pi 3 model B/2B/B+ PCB board.
This firm design, made out of plastic is held together, easy to install.
Easy access to the SD-Card and all other ports without opening the case.
Inspired by the Nintendo Entertainment System.
Power Button, Reset Botton and LED indicate light
Front loading cartridge cover: There are two USB ports with one standard RJ-45 connector.
Improved HDMI and Audio Ports, which can improve the experience of using HDMI and Audio output cable.
Micro SD card slot on the Side, which leaves more room for operation.
Product Size: 9.2 * 11.9 * 4.5CM
Product weight: 0.232KG
Cooling Fan's Specification:
Rated voltage: DC5V;
Working voltage :3.0~5 .8 V;
Air volume: 5 m3 / h;
1 * NESPi Case
2 * USB power cable, DIY power cable
1 * Internet cable, fan power cord, USB cable
4 * Adaptable PCB
1 * Cooling Fan
1 * Screw driver
1 * Instruction manual
Features & Highlights
- Note：The Raspberry Pi 3 Board is not included. The Intruction Manual download link:http://retroflag.com/download/NESPi_CASE_Manual.pdf
- NESPi CASE - Perfectly match Raspberry Pi 3 model B/2B/B+ PCB board. This is a NES inspired enclosure for your Raspberry Pi system. It can turn your bare Raspberry Pi PCB into an elaborate console in an instance.
- Easy to install - Easy access to the SD-Card and all other ports without opening the case.
- Front loading cartridge cover - There are two USB ports with one standard RJ-45 connector. Micro SD card slot on the Side which leaves more room for operation.
- NES Style - Improved HDMI and Audio Ports which can improve the experience of using HDMI and Audio output cable. We created this Pi case applying the most iconic element in the retro game world as homage to the most classic console ever made. POWER button, RESET button and LED all functional
|Color:||Nespi Case for Rpi|
|Item Weight:||0.41 pounds|
|Item Size:||4.69 x 1.77 x 1.77 inches|
|Package Weight:||0.52 pounds|
|Package Size:||5.04 x 2.28 x 2.28 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by MakerFocus, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Smraza new case kit can fits for raspberry pi 3 model b+. It compatible with Raspberry Pi 3 B+, raspberry pi 2, 3 model b, 3B+(B plus). The Micro SD card is preloaded the NOOB system, and it adapts to Raspberry Pi NOOBS operating system. Note: 1. ...
mpn: TB-2017-3, ean: 0642940884717,
[Packing List] 1 x X850 Expansion board 1 x USB 3.0 cable(Length: 80 cm/ 31.49 inch) 1 x USB connector 1 x Power cable(Length:10.6 cm / 4.17 inch)1 x Pack of screws [Overview] The X850 expansion board provides a storage solution for raspberry pi, It...
mpn: RQ-URK-001, ean: 0747100058370,
Component listing: 1pcs UNO R3 Controller Board1pcs Breadboard Expansion Board1pcs Power Supply ModuleWARNING: Pls. do not use the voltage higher than 9V1pcs LCD1602 Module (with pin header)1pcs Membrane Switch Module1pcs MAX7219 LED Dot Matrix Modu...
mpn: 35TFTV1, ean: 0652054941015,
This TFT touchscreen have good brightness and 480×320 pixels resolution (3.5″ diagonal), this display has a 4-wires resistive touch panel, so you can create interactive design in your project. the shield built-in Micro-SD card socket, you can use ...
Package Included: 1) Black and clear Case x 1 2) Heatsinks x 3 (2 pcs aluminium heatsinks, 1 copper heatsinks ) 3) 5V/2.5A Power Supply Adapter with on/off switch cable x 1 4) Mini Cooling fan x 1 Note: ①The case contains 9 black and clear layers,...
mpn: 3405, ean: 0602401813243,
Aww yeah, it's the Feather you have been waiting for! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium ...
Features: This TFT LCD Screen Module with a LCD break , SD card and Flash design. So it's a powerful extension module for your project. Dimension: 3.5 inch Controller: ILI9481 or ILI9488 driver(default in random) Resolution: 480x320 Data bits: 8...
mpn: S15s, ean: 0745360618136,
The kit contain many common components for you to start your first project. If you need MORE INFORMATION, please contact us by buyer message to get support. Note: This kit does not include the controller board and AC/DC adapter, you need to buy it s...
mpn: IOT-AZ3166, ean: 0819927011682,
Build a Cloud Powered IoT App in Minutes The MXChip IoT DevKit (a.k.a DevKit) can be used to develop and prototype Internet of Things (IoT) solutions leveraging Microsoft Azure services. It includes an Arduino compatible board with rich peripherals a...
Kuman Breadboard Learning Kit Cable Resistor Capacitor LED Potentiometer for Arduino, also suitable for Raspberry pi 3 model B,2B, rpi 1 B+ A+ A so on. Component listing: 400 tie-points Breadboard X 1 Power Supply Module X 1 Female-to-male Dupont ...