DC Brushless Cooling Fan, UCEC 4010 12V DC Axial Fan 40x40x10MM 2Pin for Computer Case, 3D Printer Extruder Humidifier and Other Small Appliances - 2 Pack
Super Savings Item! Save 31% on the DC Brushless Cooling Fan, UCEC 4010 12V DC Axial Fan 40x40x10MM 2Pin for Computer Case, 3D Printer Extruder Humidifier and Other Small Appliances - 2 Pack by UCEC at Makassar Webs. MPN: UCEC_#LQ268A. Hurry! Limited time offer. Offer valid only while supplies last. UCEC DC Brushless Cooling Fan is design for computer Case, 3D Printer Humidifier and other small appliances. Features: Electrical Protection:
Electrical Protection: Electronic circuit protection, impedance protection and temperature control protection.
Frame Material: Plastic PBT UL94-V0
Blades Material: Plastic PBT UL94-V0
Rated Voltage: 12V DC
Bearing System: Ball and Sleeve Bearing
Storage Temperature:-30℃ -- 70 ℃
Size: 40x40x10MM / 1.6x1.6x0.39inch
Blades Diameter: 38 mm
Operation Voltage Range: 6.0-13.8V DC
Current: 0.09 Amp
Input Power 1.08 W
Air Flow: 6.08 CFM
Noise Level: 28 dBA
DC Line Length: 360mm
Step 1: Install the screws and nuts on the fan
Step 2: put the fan on the computer case and then use screw driver to screw it up carefully
Step 3: Connect the cable to the fan connector
2 x UCEC 12V DC Brushless Cooling Fan
Features & Highlights
- Provide with Enough Airflow --- Thanks to upgrade bearing system, UCEC Brushless Fan can reach 7000 RPM and provides an enormous amount of airflow, 7 pieces of blades get a better heat dissipation effect. Ball and sleeve bearing system allows the fan to be laid flat or stand upright.
- Safe & Quiet --- CE, FCC, RoHS compliant and electrical protection, keep your 3D printer or computer running smoothly. Effectively solve the overheating problem of your computer or 3D printer. Anti-Vibration Design makes this Brushless fan can run so quietly that you can't feel it.
- Well Built --- Bearing System: Ball and Sleeve Bearing; Speed:7000 RPM; Air Flow:6.08 CFM; Noise Level: 28 dBA; Connector: 2pin-ph2.5; Rated Voltage: 12V DC; Power cable Length: 360mm.
- Advanced Design --- UCEC Brushless Fan can provide with large air flow; low noise; long span life; good running stability and corrosion resistance.
- Compatibility --- Designed for projects that requires cooling or ventilation; also can be used as a replacement fan for various products. Suitable for computer Case, 3D printer, humidifier and other small appliances.
|Package Weight:||0.08 pounds|
|Package Size:||3.86 x 1.46 x 1.46 inches|